污水处理厂家:延长离心机、脱脂机寿命的方法（Sewage treatment factory: method to prolong the life of centrifuge and degreaser）

尽管离心机不是有价值的仪器，但几乎每个实验室中都有1到2个离心机，因为该仪器将用于许多实验，由于它和脱脂机一样的使用频率很高，因此应妥善维护以确保其使用。 污水处理中如何延长它的使用年限呢？ Although the centrifuge is not a valuable instrument, there are one or two centrifuges in almost every laboratory, because the instrument will be used for many experiments, and because it is used with the same frequency as the degreaser, it should be properly maintained to ensure its use. How to prolong its service life in sewage treatment?       1.应当为离心机准备一张注册和使用表。 使用前，用户应记录运行时间和使用地点的使用次数。 养成这样的良好习惯对机器有利，可以有效地实施用户责任制，每个人都不会随意损坏机器。 A registration and use list for the centrifuge should be prepared. Before use, the user should record the use time and place of use times. It is good for the machine to form such a good habit, and the user responsibility can be effectively implemented, so that everyone will not damage the machine at will.       2.运行时，必须平衡并放置离心管，并且放入转子时必须确保平衡。 切勿高于它的最大速度，然后继续运行。 When used, the centrifugal tube must be balanced and placed, and the balance must be ensured when placed into the rotor. Do not exceed its maximum speed and continue running.       3.如果在使用过程当中发现任何异常，请务必立即关闭电源开关并停止维修。 If any abnormality is found during use, be sure to turn off the power switch and stop maintenance immediately.       4.如果使用的离心机是高盐溶液，例如硫酸铵，则必须及时清洗，以免腐蚀。 If the centrifuge used is a high-salt solution, such as ammonium sulfate, it must be cleaned promptly to avoid corrosion.       以上是延长使用年限的一些注意事项。在这里污水处理厂家提醒，新人们在使用离心机时必须阅读说明手册，或者在老员工的指导下进行，不要随意操作。 The above is to extend the service life of some matters needing attention. Here, the sewage treatment factory warns that new customers must read the instruction manual when using the centrifuge, or do so under the guidance of the old staff, not at will.